Skip to main content

iPhone XS 显示屏总成更换

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Chinese

Translating step 1

Step 1
iPhone XS Display Assembly Replacement: step 0, image 1 of 2 iPhone XS Display Assembly Replacement: step 0, image 2 of 2
  • Remove five screws securing the logic board connector bracket, of the following lengths:

  • Three 1.0 mm Y000 screws

  • One 1.3 mm Y000 screw

  • One 3.7 mm Phillips screw

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

卸下固定主板连接器支架的五颗螺钉,如下所示:

三个1.0毫米Y000螺钉

一个1.3毫米Y000螺丝

一个3.7毫米十字螺丝

在整个维修过程中,记录每个螺丝的准确位置,并确保它准确地回到原来的位置,以免损坏您的iPhone。

Your contributions are licensed under the open source Creative Commons license.