Fix Your Stuff Community Store

Remplacement de la coque avant de la JBL Charge 3

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Back to Guide
English
French
Previous step

Translating step 2

Step 2
JBL Charge 3 Front Cover Replacement: step 0, image 1 of 1

  • Pull apart your cover gently from both sides and remove it from the speaker housing.

  • There are screws around the foot of the device that may need loosening to be able to unclip the other side of the cover.

  • The inside of the front cover has holes that must match with their corresponding pins on the speaker housing for proper reassembly.

  • Removing the Front Cover does not affect the waterproof seals of the device. However, removing any further disassembly of your speaker will require removing waterproof seals and gaskets. Your device may no longer be waterproof after these have been altered.

Extrayez délicatement la coque des deux côtés et enlevez-la du châssis de l'enceinte.

L'intérieur de la coque avant comprend des des trous qui doivent correspondre au châssis de l'enceinte pour un remontage correct.

Retirer la coque avant n'affecte pas l'étanchéité de l'appareil. En revanche, retirer tout autre élément de votre enceinte nécessitera d'enlever les scellés et les joints d'étanchéité. Votre appareil pourrait ne plus être étanche après leur manipulation.

[* black] Pull apart your cover gently from both sides and remove it from the speaker housing.
+[* icon_note] There are screws around the foot of the device that may need loosening to be able to unclip the other side of the cover.
[* icon_reminder] The inside of the front cover has holes that must match with their corresponding pins on the speaker housing for proper reassembly.
[* icon_caution] Removing the Front Cover does not affect the waterproof seals of the device. However, removing any further disassembly of your speaker will require removing waterproof seals and gaskets. Your device may no longer be waterproof after these have been altered.

Your contributions are licensed under the open source Creative Commons license.