Fix Your Stuff Community Store

Reemplazo del altavoz inferior del iPhone XS

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 2

Step 2
iPhone XS Lower Speaker Replacement: step 0, image 1 of 3 iPhone XS Lower Speaker Replacement: step 0, image 2 of 3 iPhone XS Lower Speaker Replacement: step 0, image 3 of 3

  • The brackets are lightly adhered in place.

  • Gently lift to unstick and remove each bracket, being careful not to bend it.

  • If necessary, apply a little heat with a hair dryer or heat gun to soften the adhesive. (Putting an iOpener on the brackets is not recommended, as this may bend the spring contacts along the top.)

Los soportes se adhieren ligeramente en su lugar.

Suavemente levanta para despegar y remover cada soporte, teniendo cuidado de no doblarlos.

Si es necesario, aplica un poco de calor con un pistola de calor para ablandar el adhesivo (No es recomendable colocar un iOpener en los soportes ya que podría doblar los contactos de muelle a lo largo de la parte superior)

Your contributions are licensed under the open source Creative Commons license.