Fix Your Stuff Community Store

Extracción de panel de cristal trasero del LG G6

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 8

Step 8
LG G6 Rear Glass Panel Removal: step 0, image 1 of 3 LG G6 Rear Glass Panel Removal: step 0, image 2 of 3 LG G6 Rear Glass Panel Removal: step 0, image 3 of 3

  • As seen in Step 1, the fingerprint reader cable runs to the left of the camera, fairly close to the edge of the phone. Be careful as you cut through the adhesive in the upper edges of the phone.

  • Carefully slide an opening pick across the top edge of the phone, separating the last of the adhesive securing the rear glass panel.

Como se ve en el Paso 1, el cable del lector de huellas digitales corre a la izquierda de la cámara, bastante cerca del borde del teléfono. Ten cuidado al cortar el adhesivo en los bordes superiores del teléfono.

Desliza con cuidado una púa de apertura a través del borde superior del teléfono, separando la última parte del adhesivo que sujeta el panel de cristal trasero.

Your contributions are licensed under the open source Creative Commons license.