Skip to main content

iPad Mini 3 Wi-Fi LCD Shield Plate Replacement

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
French

Translating step 21

Step 21
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: step 0, image 1 of 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: step 0, image 2 of 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: step 0, image 3 of 3
  • Leave the pick from the last step in place to prevent the adhesive from re-sealing.

  • With a new pick, slice gently over the left-hand antenna, stopping before the home button.

  • Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.

  • If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.

  • Leave the pick in place before moving on.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.