Dell XPS 15 9575 相互接続ケーブルの交換

English

Japanese

Guide Prerequisites

All prerequisite guides must be translated before this translation is considered complete.

Dell XPS 15 9575 下部カバーの交換

Guide Information

= Done = Incomplete

What part are you replacing?

Title

Introduction

This guide shows you how to remove/replace the Interconnect cable in the Dell 15 9575.

The interconnect cable generally allows the motherboard and daughterboard to communicate with one another. However, in the design of the Dell XPS 9575, the cable is also integrated with a couple of fan covers. Since the cable sits over the battery connection and includes these fan covers, the cable will need to be removed before you can access the fan or battery. The cable uses a special screwed in connection, so be sure to align the pins during reassembly before retightening the screws to not bend any of the connector pins.

Signs that the interconnect cable is damaged or malfunctioning may be hard to diagnose, as any issues could be the fault of a malfunctioning motherboard or daughterboard. Instead, if you are having issues that could be attributed to a damaged board; like constant freezing, inability to start up, or a blue screen on start up; check to see that the interconnect cable isn’t damaged and is seated to both boards properly before replacing the mother or daughterboard. Check out our [[Dell XPS 15 9575 Troubleshooting|troubleshooting page]] for more details on problems you may experience with regards to the interconnect cable.

Conclusion

What part are you replacing?

Title

Introduction

Conclusion

Guide Steps

Step 1

#0プラスドライバーを使って、相互接続ケーブルを固定している、長さ3.2mmのシルバーのねじを4本外してください。

Step 2

ファンと相互接続ケーブルの間にプラスチックのオープニングピックの先端を差し込みます。

Step 3

回路基板の両側から相互接続ピンをナイロン製ピンセットで外します。

Your contributions are licensed under the open source Creative Commons license.