Fix Your Stuff Community Store

Reemplazo de la placa lógica del iPod Touch de Séptima Generación

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Back to Guide
English
Spanish
Next step

Translating step 1

Step 1
iPod Touch 7th Generation Logic Board Assembly Replacement: step 0, image 1 of 1

  • Flip the logic board assembly back over to expose the connectors on the back.

  • Use the edge of a plastic opening tool to gently pry the antenna connector off the back of the logic board.

  • This cable is very delicate; be careful not to stress the point where it connects to the antenna.

Voltea el ensamblaje de la placa lógica para exponer los conectores de la parte posterior.

Usa el borde de una herramienta de apertura de plástico para sacar suavemente el conector de la antena de la parte posterior de la placa lógica.

Este cable es muy delicado; ten cuidado de no tensar el punto donde se conecta a la antena.

Your contributions are licensed under the open source Creative Commons license.