Fix Your Stuff Community Store

Extracción de la bobina de carga y tapa de la placa madre del Xiaomi Mi 10

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 4

Step 4
Xiaomi Mi 10 Motherboard Cover & Charging Coil Removal, Loosen the NFC & charging coil assembly: step 0, image 1 of 3 Xiaomi Mi 10 Motherboard Cover & Charging Coil Removal, Loosen the NFC & charging coil assembly: step 0, image 2 of 3 Xiaomi Mi 10 Motherboard Cover & Charging Coil Removal, Loosen the NFC & charging coil assembly: step 0, image 3 of 3
Loosen the NFC & charging coil assembly

  • There is a small piece of protective copper foil underneath the NFC and charging coil assembly. Avoid damaging it during the following procedure.

  • Slide a plastic card or playing card underneath the NFC and charging coil assembly.

  • Use the card to carefully loosen the adhesive underneath the left edge of the assembly.

  • To make this process easier, you can apply a heated iOpener to the left edge of the NFC and charging coil assembly to soften the adhesive.

  • Do not remove the NFC and charging coil assembly all the way yet. It is still glued to the motherboard cover.

Suelta la bobina de carga y NFC

Hay un pequeño trozo de lámina de cobre protector debajo del ensamblaje de NFC y la bobina de carga. Evita dañarla durante el siguiente procedimiento.

Desliza una tarjeta plástica o una carta de juego debajo del NFC y el ensamblaje de la bobina de carga.

Usa la tarjeta para aflojar con cuidado el adhesivo que hay debajo del borde izquierdo del ensamblaje.

Para facilitar este proceso, puede aplicar un iOpener caliente en el borde izquierdo del ensamblaje de NFC y bobina de carga para ablandar el adhesivo.

No quites el ensamblaje de NFC y la bobina de carga completamente todavía. Todavía está pegado a la cubierta de la placa madre.

[title] Loosen the NFC & charging coil assembly
[* red] ***There is a small piece of protective copper foil underneath the NFC and charging coil assembly. Avoid damaging it during the following procedure.***
-[* black] Slide a plastic card or playing card underneath the NFC and charging coil assembly.
+[* black] Slide a [product|IF145-101|plastic card] or playing card underneath the NFC and charging coil assembly.
[* black] Use the card to carefully loosen the adhesive underneath the left edge of the assembly.
[* icon_note] To make this process easier, you can apply a [guide|25705|heated iOpener|new_window=true] to the left edge of the NFC and charging coil assembly to soften the adhesive.
[* icon_caution] Do not remove the NFC and charging coil assembly all the way yet. It is still glued to the motherboard cover.

Your contributions are licensed under the open source Creative Commons license.