Fix Your Stuff Community Store

Xiaomi Mi 10 Verwijderen van de moederbordcover en oplaadspoel

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Back to Guide
English
Dutch
Previous step Next step

Translating step 4

Step 4
Xiaomi Mi 10 Motherboard Cover & Charging Coil Removal, Loosen the NFC & charging coil assembly: step 0, image 1 of 3 Xiaomi Mi 10 Motherboard Cover & Charging Coil Removal, Loosen the NFC & charging coil assembly: step 0, image 2 of 3 Xiaomi Mi 10 Motherboard Cover & Charging Coil Removal, Loosen the NFC & charging coil assembly: step 0, image 3 of 3
Loosen the NFC & charging coil assembly

  • There is a small piece of protective copper foil underneath the NFC and charging coil assembly. Avoid damaging it during the following procedure.

  • Slide a plastic card or playing card underneath the NFC and charging coil assembly.

  • Use the card to carefully loosen the adhesive underneath the left edge of the assembly.

  • To make this process easier, you can apply a heated iOpener to the left edge of the NFC and charging coil assembly to soften the adhesive.

  • Do not remove the NFC and charging coil assembly all the way yet. It is still glued to the motherboard cover.

Maak de NFC- en oplaadspoelmodule los.

Er bevindt zich een klein stukje koperen beschermfolie onder de NFC- en oplaadspoelmodule. Voorkom dat je deze beschadigt tijdens de volgende procedure.

Schuif een plastic kaart of speelkaart onder de NFC- en oplaadspoelmodule.

Gebruik de kaart om de lijm onder de linkerzijde van de module op voorzichtige wijze los te maken.

Je kunt, om dit proces gemakkelijker te maken, een verwarmde iOpener gebruiken om de linkerkant van de NFC- en oplaadspoelmodule te verwarmen en de lijm eronder zo te verzwakken.

Verwijder de NFC- en oplaadspoelmodule nog niet volledig, aangezien deze nog steeds door middel van lijm aan de moederbordcover bevestigd is.

[title] Loosen the NFC & charging coil assembly
[* red] ***There is a small piece of protective copper foil underneath the NFC and charging coil assembly. Avoid damaging it during the following procedure.***
-[* black] Slide a plastic card or playing card underneath the NFC and charging coil assembly.
+[* black] Slide a [product|IF145-101|plastic card] or playing card underneath the NFC and charging coil assembly.
[* black] Use the card to carefully loosen the adhesive underneath the left edge of the assembly.
[* icon_note] To make this process easier, you can apply a [guide|25705|heated iOpener|new_window=true] to the left edge of the NFC and charging coil assembly to soften the adhesive.
[* icon_caution] Do not remove the NFC and charging coil assembly all the way yet. It is still glued to the motherboard cover.

Your contributions are licensed under the open source Creative Commons license.