Fix Your Stuff Community Store

小米 Mi 10 主板盖 & 充电线圈移除

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Back to Guide
English
Chinese
Previous step Next step

Translating step 4

Step 4
Xiaomi Mi 10 Motherboard Cover & Charging Coil Removal, Loosen the NFC & charging coil assembly: step 0, image 1 of 3 Xiaomi Mi 10 Motherboard Cover & Charging Coil Removal, Loosen the NFC & charging coil assembly: step 0, image 2 of 3 Xiaomi Mi 10 Motherboard Cover & Charging Coil Removal, Loosen the NFC & charging coil assembly: step 0, image 3 of 3
Loosen the NFC & charging coil assembly

  • There is a small piece of protective copper foil underneath the NFC and charging coil assembly. Avoid damaging it during the following procedure.

  • Slide a plastic card or playing card underneath the NFC and charging coil assembly.

  • Use the card to carefully loosen the adhesive underneath the left edge of the assembly.

  • To make this process easier, you can apply a heated iOpener to the left edge of the NFC and charging coil assembly to soften the adhesive.

  • Do not remove the NFC and charging coil assembly all the way yet. It is still glued to the motherboard cover.

软化 NFC 和充电线圈组件

NFC和充电线圈组件下方有一小块保护性铜箔。避免在以下过程中损坏它。

将塑料卡或扑克牌滑到NFC和充电线圈组件下方。

使用卡小心地软化组件左边缘下方的粘合剂。

为了使此过程更容易，你可以在NFC和充电线圈组件的左边缘应用加热的iOpener，以软化粘合剂。

请勿完全移除NFC和充电线圈组件。它仍然粘在主板盖上。

[title] Loosen the NFC & charging coil assembly
[* red] ***There is a small piece of protective copper foil underneath the NFC and charging coil assembly. Avoid damaging it during the following procedure.***
-[* black] Slide a plastic card or playing card underneath the NFC and charging coil assembly.
+[* black] Slide a [product|IF145-101|plastic card] or playing card underneath the NFC and charging coil assembly.
[* black] Use the card to carefully loosen the adhesive underneath the left edge of the assembly.
[* icon_note] To make this process easier, you can apply a [guide|25705|heated iOpener|new_window=true] to the left edge of the NFC and charging coil assembly to soften the adhesive.
[* icon_caution] Do not remove the NFC and charging coil assembly all the way yet. It is still glued to the motherboard cover.

Your contributions are licensed under the open source Creative Commons license.