Fix Your Stuff Community Store

Extracción de la tapa trasera del Samsung Galaxy S20

Notice: You are editing a prerequisite guide. Any changes you make will affect all 17 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 9

Step 9
Samsung Galaxy S20 Back Cover Removal, Separate the right edge adhesive: step 0, image 1 of 3 Samsung Galaxy S20 Back Cover Removal, Separate the right edge adhesive: step 0, image 2 of 3 Samsung Galaxy S20 Back Cover Removal, Separate the right edge adhesive: step 0, image 3 of 3
Separate the right edge adhesive

  • Apply a suction cup to the back of the phone, as close to the center of the right edge as possible.

  • Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.

  • Insert the point of an opening pick into the gap.

  • Like with the previous edge, you will need to tilt the opening pick downward to fully insert it underneath the back cover.

Separa el adhesivo de borde derecho

Aplica una ventosa en la parte posterior del teléfono, lo más cerca posible del centro del borde derecho.

Tira de la ventosa con una fuerza fuerte y constante para crear un espacio entre la cubierta trasera y el marco.

Inserta la punta de una púa de apertura en el espacio.

Al igual que con el borde anterior, deberá inclinar la púa de apertura hacia abajo para insertarlo completamente debajo de la tapa trasera.

Your contributions are licensed under the open source Creative Commons license.