Notice: You are editing a prerequisite guide. Any changes you make will affect all 17 guides that include this step.
Translating step 13
Step 13
Remove the back cover
-
Lift the back cover slowly. Use opening picks to slice any remaining adhesive.
-
Remove the back cover.
-
This is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working.
-
Remove any adhesive chunks with a pair of tweezers or your fingers. Apply heat if you're having trouble separating the adhesive.
-
If you're using custom-cut adhesives, follow this guide.
-
If you're using double-sided tape, follow this guide.
Your contributions are licensed under the open source Creative Commons license.