Fix Your Stuff Community Store

Extracción del cable flexible del Samsung Galaxy S20

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Back to Guide
English
Spanish
Next step

Translating step 1

Step 1
Samsung Galaxy S20 Flex Cable Removal, Disconnect the daughterboard: step 0, image 1 of 3 Samsung Galaxy S20 Flex Cable Removal, Disconnect the daughterboard: step 0, image 2 of 3 Samsung Galaxy S20 Flex Cable Removal, Disconnect the daughterboard: step 0, image 3 of 3
Disconnect the daughterboard

  • Use a spudger to pry up and disconnect the main and auxiliary flex cables from the daughterboard near the bottom of the device.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Desconecta la placa hija

Usa un spudger para levantar y desconectar los cables flexibles principales y auxiliares de la placa hija cerca de la parte inferior del dispositivo.

Para volver a colocar los conectores de prensa como este, alinear cuidadosamente y presionar hacia abajo en un lado hasta que encaje en su lugar, y luego repetir en el otro lado. No presiones en el medio. Si el conector está mal alineado, los pines pueden doblarse, causando un daño permanente.

Your contributions are licensed under the open source Creative Commons license.