Skip to main content

三星 Galaxy S20 柔性电缆移除

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
Chinese

Translating step 1

Step 1
Samsung Galaxy S20 Flex Cable Removal, Disconnect the daughterboard: step 0, image 1 of 3 Samsung Galaxy S20 Flex Cable Removal, Disconnect the daughterboard: step 0, image 2 of 3 Samsung Galaxy S20 Flex Cable Removal, Disconnect the daughterboard: step 0, image 3 of 3
Disconnect the daughterboard
  • Use a spudger to pry up and disconnect the main and auxiliary flex cables from the daughterboard near the bottom of the device.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

使用撬棒撬起主弯曲电缆和辅助弯曲电缆,并将其从设备底部附近的子板上断开。

要重新连接像这样的压力连接器,请仔细对齐并向下按压一侧直到其卡入到位,然后在另一侧重复。不要向下压中间。如果连接器未对准,则插针会弯曲,从而造成永久性损坏。

Your contributions are licensed under the open source Creative Commons license.