Skip to main content

Reemplazo del ensamblaje del panel frontal del iPad 4 CDMA

Notice: You are editing a prerequisite guide. Any changes you make will affect all 26 guides that include this step.

English
Spanish

Translating step 7

Step 7
iPad 4 CDMA Front Panel Assembly Replacement: step 0, image 1 of 2 iPad 4 CDMA Front Panel Assembly Replacement: step 0, image 2 of 2
  • Use the flat end of a spudger to loosen the adhesive underneath the digitizer ribbon cable.

  • Pull the digitizer ribbon cable straight out of its sockets on the logic board.

Utiliza el extremo plano de un spudger para aflojar el adhesivo situado debajo del cable plano digitalizador.

Saca el cable plano del digitalizador de sus zócalos en la placa lógica.

Your contributions are licensed under the open source Creative Commons license.