Fix Your Stuff Community Store

iMac Intel 21,5" Display-Klebestreifen tauschen

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Back to Guide
English
German
Previous step Next step

Translating step 5

Step 5
iMac Intel 21.5" Display Adhesive Strips Replacement, Remove the backing from the first adhesive strip: step 0, image 1 of 3 iMac Intel 21.5" Display Adhesive Strips Replacement, Remove the backing from the first adhesive strip: step 0, image 2 of 3 iMac Intel 21.5" Display Adhesive Strips Replacement, Remove the backing from the first adhesive strip: step 0, image 3 of 3
Remove the backing from the first adhesive strip

  • Start with strip 03, which goes on the right vertical side of the rear enclosure.

  • Before you peel off any backing, line the adhesive strip up along the frame of the iMac to get an idea of where it goes.

  • Grasp the blue tab and peel the short piece of backing off the back of the strip to expose a section of adhesive to attach to the enclosure.

Rückfolie vom ersten Klebestreifen abziehen

Fange mit Streifen 03 an, der auf die rechte vertikale Seite des Rückgehäuses kommt.

Bevor du irgendwelche Rückfolien abziehst, richte den Streifen am Rahmen des iMac aus, um zu sehen, wohin er gehört.

Fasse die blaue Lasche und ziehe das kurze Stück Rückfolie vom Streifen ab, um einen Teil der Klebefläche freizulegen, die an das Gehäuse geklebt wird.

Your contributions are licensed under the open source Creative Commons license.