Fix Your Stuff Community Store

Remplacement des bandes adhésives de l'écran de l'iMac Intel 21,5"

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Back to Guide
English
French
Previous step Next step

Translating step 5

Step 5
iMac Intel 21.5" Display Adhesive Strips Replacement, Remove the backing from the first adhesive strip: step 0, image 1 of 3 iMac Intel 21.5" Display Adhesive Strips Replacement, Remove the backing from the first adhesive strip: step 0, image 2 of 3 iMac Intel 21.5" Display Adhesive Strips Replacement, Remove the backing from the first adhesive strip: step 0, image 3 of 3
Remove the backing from the first adhesive strip

  • Start with strip 03, which goes on the right vertical side of the rear enclosure.

  • Before you peel off any backing, line the adhesive strip up along the frame of the iMac to get an idea of where it goes.

  • Grasp the blue tab and peel the short piece of backing off the back of the strip to expose a section of adhesive to attach to the enclosure.

Décoller le film de la première bande

Commencez par la bande 03 qui se pose le long du bord droit du boîtier arrière.

Avant de décoller quoi que ce soit, alignez la bande le long du châssis de l'iMac pour vous faire une idée de son emplacement.

Saisissez la languette bleue et décollez le petit morceau de film qui protège la colle au dos de la bande.

Your contributions are licensed under the open source Creative Commons license.