Fix Your Stuff Community Store

Sostituzione strisce adesive dello schermo iMac Intel 21.5"

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Back to Guide
English
Italian
Previous step Next step

Translating step 5

Step 5
iMac Intel 21.5" Display Adhesive Strips Replacement, Remove the backing from the first adhesive strip: step 0, image 1 of 3 iMac Intel 21.5" Display Adhesive Strips Replacement, Remove the backing from the first adhesive strip: step 0, image 2 of 3 iMac Intel 21.5" Display Adhesive Strips Replacement, Remove the backing from the first adhesive strip: step 0, image 3 of 3
Remove the backing from the first adhesive strip

  • Start with strip 03, which goes on the right vertical side of the rear enclosure.

  • Before you peel off any backing, line the adhesive strip up along the frame of the iMac to get an idea of where it goes.

  • Grasp the blue tab and peel the short piece of backing off the back of the strip to expose a section of adhesive to attach to the enclosure.

Rimuovi la pellicola protettiva posteriore dalla prima striscia

Inizia con la striscia 03, che va sul lato destro verticale del case posteriore.

Prima di rimuovere ogni pellicola protettiva, allinea la striscia lungo la cornice dell'iMac per farti un'idea di come vada applicata.

Afferra la linguetta blu e rimuovi il pezzo corto della pellicola protettiva dal retro della striscia per esporre una porzione di adesivo da incollare al case.

Your contributions are licensed under the open source Creative Commons license.