Fix Your Stuff Community Store

iMac Intel 21,5" Display-Klebestreifen tauschen

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Back to Guide
English
German
Previous step Next step

Translating step 7

Step 7
iMac Intel 21.5" Display Adhesive Strips Replacement: step 0, image 1 of 3 iMac Intel 21.5" Display Adhesive Strips Replacement: step 0, image 2 of 3 iMac Intel 21.5" Display Adhesive Strips Replacement: step 0, image 3 of 3

  • With the spudger still poking through the hole in the adhesive strip, push the spudger tip into the corresponding hole in the frame of the iMac.

  • Using the hole and spudger to anchor the position of the adhesive strip, line the strip up against the right edge, gently pulling up against the spudger to ensure the strip is taut, and stick it onto the frame.

Drücke die Spudgerspitze, die immer noch im Loch des Klebestreifens steckt, in das entsprechende Loch im Rahmen des iMac.

Benutze das Loch und den Spudger, um die Position des Klebestreifens zu verankern, und richte den Klebestreifen an der rechten Kante aus. Ziehe dabei vorsichtig gegen den Spudger, um den Streifen zu spannen, und klebe ihn dann am Rahmen fest.

Your contributions are licensed under the open source Creative Commons license.