Fix Your Stuff Community Store

iMac Intel 21.5 英寸显示器胶条更换

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Back to Guide
English
Chinese
Previous step Next step

Translating step 14

Step 14
iMac Intel 21.5" Display Adhesive Strips Replacement: step 0, image 1 of 3 iMac Intel 21.5" Display Adhesive Strips Replacement: step 0, image 2 of 3 iMac Intel 21.5" Display Adhesive Strips Replacement: step 0, image 3 of 3

  • The microphone hole is the center hole flanked by two larger holes.

  • Align the adhesive strip to the bottom edge by positioning the microphone notch over the microphone hole.

  • If your iMac does not have a microphone hole, align the right end of the strip such that the L-bend sits next to the right vertical adhesive. The L-bend should not overlap the right vertical adhesive.

  • The adhesive tears easily. Be careful not to pull on the strip with too much force.

  • Once you have aligned the strip, carefully set the left exposed edge onto the iMac to secure the alignment.

麦克风孔是 中心孔，两侧有两个较大的孔。

将麦克风槽口对准麦克风孔，将胶条对准底部边缘。

如果你的 iMac 没有麦克风孔，请对齐胶条的右端，使 L 形弯头位于右侧垂直粘合剂旁边. L 形弯曲不应与右侧垂直胶条重叠。

胶条很容易撕裂。注意不要用力过猛拉扯胶条。

对齐胶条后，小心地将左侧露出的边缘固定在 iMac 上，以确保对齐。

Your contributions are licensed under the open source Creative Commons license.