Describe the specific part or component of this device you're working on. Ex: Battery
Create a title.
Communicate background information before the reader dives into the guide.
Step 1
Never forget: pull out the mains plug!
Step 2
Unscrew the two Torx T10 screws at the top of the right side panel.
Step 3
Lay the machine on its side with the water tank side facing up.
Step 4
You may need to pry the front edge with a plastic tool.
Step 5
Pull off the silicone hose that leads to the water connection of the tank from the inside.
Step 6
Remove the cover over the electronics.
Your contributions are licensed under the open source Creative Commons license.