Fix Your Stuff Community Store

Xbox Series S 塑料外壳更换

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Back to Guide
English
Chinese
Previous step Next step

Translating step 5

Step 5
Xbox Series S Plastic Case Replacement, Remove the plastic case: step 0, image 1 of 3 Xbox Series S Plastic Case Replacement, Remove the plastic case: step 0, image 2 of 3 Xbox Series S Plastic Case Replacement, Remove the plastic case: step 0, image 3 of 3
Remove the plastic case

  • With the bottom of the Xbox facing you, pull the two bottom-rear corners of the plastic case away from each other.

  • As you pull the corners apart, slide the back panel towards the bottom of the device. This releases the back panel from the plastic case.

  • The back panel should now settle on top of the clips on the back of the plastic case.

  • The back panel is permanently attached to the aluminum chassis.

  • Do not attempt to fully remove the chassis from the plastic case with this technique. You may risk breaking your case.

取下塑料外壳

将 Xbox 底部面向你，将塑料外壳的两个底部后角相互拉开。

将边角拉开时，将后面板向设备底部滑动。这会从塑料外壳中释放后面板。

后面板现在应该固定在塑料外壳背面的夹子上。

后面板永久固定在铝制底盘上。

请勿尝试使用此技术从塑料外壳中完全卸下机箱。你可能会冒着破案的风险。

Your contributions are licensed under the open source Creative Commons license.