Fix Your Stuff Community Store

Cómo quitar la placa protectora superior en una PlayStation 5

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 4

Step 4
How to Remove the Top Shield Plate on a PlayStation 5, Remove the antenna wires: step 0, image 1 of 3 How to Remove the Top Shield Plate on a PlayStation 5, Remove the antenna wires: step 0, image 2 of 3 How to Remove the Top Shield Plate on a PlayStation 5, Remove the antenna wires: step 0, image 3 of 3
Remove the antenna wires

  • Use a pair of tweezers to grip the white Wi-Fi antenna wire at its metal base, as close to the connector as possible.

  • Lift the wire's connector straight up to disconnect it from the motherboard.

  • Repeat for the black Wi-Fi antenna wire.

  • Some board revisions may not have these antenna wires. If your board is missing these connectors, skip this step.

Retira los cables de la antena.

Usa un par de pinzas para sujetar el cable blanco de la antena Wi-Fi en su base de metal, lo más cerca posible del conector.

Levanta el conector del cable hacia arriba para desconectarlo de la placa base.

Repite para el cable negro de la antena Wi-Fi.

Es posible que algunas revisiones de la placa no tengan estos cables de antena. Si a tu placa le faltan estos conectores, omite este paso.

Your contributions are licensed under the open source Creative Commons license.