Fix Your Stuff Community Store

Desoldar la placa madre

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Back to Guide
English
Spanish
Next step

Translating step 1

Step 1
Motherboard Desoldering, Desolder the vibration motors: step 0, image 1 of 3 Motherboard Desoldering, Desolder the vibration motors: step 0, image 2 of 3 Motherboard Desoldering, Desolder the vibration motors: step 0, image 3 of 3
Desolder the vibration motors

  • The next few steps require desoldering and soldering connections. To learn how to solder, check out our soldering guide—if you've already soldered, you can still find some helpful tips and tricks in this guide!

  • Flip over the controller and motherboard.

  • Use a soldering iron to desolder the vibration motor wires from the motherboard:

  • Two red wires

  • Two black wires

  • During reassembly, remember to solder the wires back into the same position. The red wires belong closest to the edge and next to the Rs on the motherboard.

Desoldar los motores de vibración

Dale la vuelta al controlador y a la placa madre.

Utiliza un soldador para desoldar los cables del motor de vibración de la placa madre:

Dos cables rojos

Dos cables negros

Durante el montaje, recuerda que debes soldar los cables en la misma posición. Los cables rojos son los que están más cerca del borde y junto a las R de la placa madre.

[title] Desolder the vibration motors
+[* icon_note] The next few steps require desoldering and soldering connections. To learn how to solder, check out our [guide|750|soldering guide|new_window=true]—if you've already soldered, you can still find some helpful tips and tricks in this guide!
[* black] Flip over the controller and motherboard.
[* black] Use a soldering iron to desolder the vibration motor wires from the motherboard:
[* red] Two red wires
[* black] Two black wires
[* icon_reminder] During reassembly, remember to solder the wires back into the same position. The red wires belong closest to the edge and next to the ***R***s on the motherboard.

Your contributions are licensed under the open source Creative Commons license.