Fix Your Stuff Community Store

マザーボードのはんだ除去

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Back to Guide
English
Japanese
Next step

Translating step 1

Step 1
Motherboard Desoldering, Desolder the vibration motors: step 0, image 1 of 3 Motherboard Desoldering, Desolder the vibration motors: step 0, image 2 of 3 Motherboard Desoldering, Desolder the vibration motors: step 0, image 3 of 3
Desolder the vibration motors

  • The next few steps require desoldering and soldering connections. To learn how to solder, check out our soldering guide—if you've already soldered, you can still find some helpful tips and tricks in this guide!

  • Flip over the controller and motherboard.

  • Use a soldering iron to desolder the vibration motor wires from the motherboard:

  • Two red wires

  • Two black wires

  • During reassembly, remember to solder the wires back into the same position. The red wires belong closest to the edge and next to the Rs on the motherboard.

振動モーターのはんだを除去します

コントローラー とマザーボードを裏返します。

はんだゴテを使って、振動モーターワイヤをマザーボードからはんだを除去します。

2本のレッドワイヤ

2本の黒いワイヤ

再組み立ての際には、ワイヤを同じ位置に戻すようにはんだ付けしてください。赤色のワイヤは、マザーボードの端とRの隣に最も近い位置に装着します。

[title] Desolder the vibration motors
+[* icon_note] The next few steps require desoldering and soldering connections. To learn how to solder, check out our [guide|750|soldering guide|new_window=true]—if you've already soldered, you can still find some helpful tips and tricks in this guide!
[* black] Flip over the controller and motherboard.
[* black] Use a soldering iron to desolder the vibration motor wires from the motherboard:
[* red] Two red wires
[* black] Two black wires
[* icon_reminder] During reassembly, remember to solder the wires back into the same position. The red wires belong closest to the edge and next to the ***R***s on the motherboard.

Your contributions are licensed under the open source Creative Commons license.