/
My Workbench

Get quick access to guides, parts and answers for your devices

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Join
Log In

Eliminación de la Touchbar del MacBook Pro de 13" con dos puertos Thunderbolt 2020

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 3

Step 3
MacBook Pro 13" Two Thunderbolt Ports 2020 Touchbar Removal, Prop Up Back Panel: step 0, image 1 of 3 MacBook Pro 13" Two Thunderbolt Ports 2020 Touchbar Removal, Prop Up Back Panel: step 0, image 2 of 3 MacBook Pro 13" Two Thunderbolt Ports 2020 Touchbar Removal, Prop Up Back Panel: step 0, image 3 of 3
Prop Up Back Panel

  • While creating the gap between the Macbook and the back panel, insert an opening pick into the gap about 0.2in.

  • Don't insert the pick further, as this could cause internal damage

  • Move the pick towards the left side of the Macbook and around the corner edge.

  • Bring the pick up towards the top of the Macbook

  • Once you reach about the middle of the Macbook, you should hear a click. This is good! You have now unhooked part of the back panel.

Panel trasero apuntalado

Mientras creas el espacio entre la Macbook y el panel posterior, inserta una púa de apertura en el espacio de aproximadamente 0,2 pulgadas.

No insertes más la púa, ya que esto podría causar daños internos.

Mueve la púa hacia el lado izquierdo de la Macbook y alrededor del borde de la esquina.

Lleva la recogida hacia la parte superior de la Macbook.

Una vez que llegues aproximadamente a la mitad de la Macbook, deberías escuchar un clic. ¡Esto es bueno! Ya has desenganchado parte del panel trasero.

Your contributions are licensed under the open source Creative Commons license.