Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.
Translating step 34
Step 34
Removing Logic Board Screws
-
Locate and remove 5x Logic Board Screws
-
3x 3.4mm Torx T5 screws
-
1x 3.6mm Torx T5 stepped screw
-
1x 3.3mm hex standoff (3mm drive)
-
During Reassembly: It may be difficult to screw the top left logic board standoff back in. If you are finding it hard to do this, take the 1.4mm screw that we removed to remove the power button bracket and screw it into the top left logic board standoff. Afterwards, take the now "cyborg" screw and screw it into the logic board.
Your contributions are licensed under the open source Creative Commons license.