Skip to main content

Samsung Galaxy Note20 Ultra 무선 충전 코일 교체

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
Korean

Translating step 1

Step 1
Samsung Galaxy Note20 Ultra Wireless Charging Coil Replacement, Disconnect the wireless charging coil: step 0, image 1 of 2 Samsung Galaxy Note20 Ultra Wireless Charging Coil Replacement, Disconnect the wireless charging coil: step 0, image 2 of 2
Disconnect the wireless charging coil
  • Use the pointed end of a spudger to pry up and disconnect the wireless charging coil press connector.

  • Take care to pry only under the edge of the connector to prevent damaging the socket itself and surrounding components.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Spudger/스퍼저의 뾰족한 끝을 사용하여 무선 충전 코일 프레스 커넥터를 들어올려 분리하세요.

소켓 자체와 주변 부품들을 손상하지 않도록 커넥터 가장자리 아래만 들어 올리세요.

이런 프레스 커넥터를 다시-연결하려면 한쪽을 조심히 정렬하여 제자리에 딱 들어맞을 때까지 누르고 나서 다른 쪽에도 반복하세요. 중앙은 누르지 마세요. 커넥터가 잘못 맞춰진 경우, 핀이 구부러지는, 영구적 손상을 입을 수 있습니다.

Your contributions are licensed under the open source Creative Commons license.