Skip to main content

깨진 스크린에 테이프 붙이기

Notice: You are editing a prerequisite guide. Any changes you make will affect all 20 guides that include this step.

English
Korean

Translating step 1

Step 1
Taping Over a Cracked Screen, Apply tape to a cracked screen: step 0, image 1 of 3 Taping Over a Cracked Screen, Apply tape to a cracked screen: step 0, image 2 of 3 Taping Over a Cracked Screen, Apply tape to a cracked screen: step 0, image 3 of 3
Apply tape to a cracked screen
  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass.

  • Lay overlapping strips of clear packing tape over the iPad's display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Do your best to follow the rest of the guide as described. However, once the glass is broken, it will likely continue to crack as you work, and you may need to use a metal prying tool to scoop the glass out.

  • Wear safety glasses to protect your eyes, and be careful not to damage the LCD screen.

디스플레이 유리에 금이 간 경우, 유리에 테이프를 붙여서 수리하는 동안 추가 파손을 막고 신체적 상해를 방지하세요.

iPad 디스플레이 전체가 덮이도록 투명 포장 테이프를 겹쳐서 붙이세요.

이렇게 하면 디스플레이를 비집거나 들어 올릴 때 유리 파편이 날리지 않고 구조적 안전성을 유지할 수 있습니다.

최선을 다해 안내서의 나머지 설명을 따르세요. 그러나, 일단 유리가 깨지면 작업하는 동안 계속해서 깨질수 있으며, 꺠진 유리 조각들은 금속재질의 도구로 퍼내야 할 수도 있습니다.

보안경을 착용하여 눈을 보호하고 LCD 스크린이 손상되지 않도록 주의하세요.

Your contributions are licensed under the open source Creative Commons license.