Skip to main content

开启步骤和断开电池

Notice: You are editing a prerequisite guide. Any changes you make will affect all 17 guides that include this step.

English
Chinese

Translating step 10

Step 10
Opening Procedure and Battery Disconnect: step 0, image 1 of 3 Opening Procedure and Battery Disconnect: step 0, image 2 of 3 Opening Procedure and Battery Disconnect: step 0, image 3 of 3
  • Insert a new opening pick into the bottom left corner and slide it around the corner toward the left edge.

  • Be careful cutting under the lower 2.5 inches (65 mm) of the left edge. Do not insert the opening pick more than 1/8 inch (3 mm) here. The display cables sit near this part of the bezel and are easily damaged. Once past the display cable area, do not insert the pick past the bezel.

  • Slide the pick along the left edge of the Surface to cut through the screen adhesive.

  • Leave this pick in the left edge to prevent the adhesive from resealing.

将一个新的三角撬片插入左下角,然后将其围绕角向左边缘滑动。

在左边缘下方 2.5 英寸(65 毫米)处小心切割。请勿将撬片插入此处超过 1/8 英寸(3 毫米)。显示屏电缆位于边框的这一部分附近,很容易损坏。一旦通过显示屏电缆区域,请勿将撬片插入边框。

沿着 Surface 的左边缘滑动撬片以切开屏幕粘合剂。

将此撬片留在左边缘以防止粘合剂重新密封。

Your contributions are licensed under the open source Creative Commons license.