Fix Your Stuff Community Store

Procedimiento de apertura y desconexión de la batería

Notice: You are editing a prerequisite guide. Any changes you make will affect all 17 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 15

Step 15
Opening Procedure and Battery Disconnect, Open the Surface: step 0, image 1 of 2 Opening Procedure and Battery Disconnect, Open the Surface: step 0, image 2 of 2
Open the Surface

  • Very slowly lift the screen assembly away from the Surface case. If you encounter any resistance, stop and check that all the adhesive is separated.

  • Do not remove the screen yet. It is still connected to the motherboard by two cables.

  • Use an opening pick to cut through any remaining adhesive.

  • The flash lens may fall out of the Surface case. Keep track of the lens and return it to its cutout in the case during reassembly.

Abre la Surface

Levanta muy lentamente el conjunto de la pantalla para separarlo de la carcasa de la Surface. Si encuentras alguna resistencia, detente y comprueba que todo el adhesivo está separado.

No retires todavía la pantalla. Todavía está conectada a la placa madre por dos cables.

Utiliza una púa de apertura para cortar los restos de adhesivo

La lente del flash puede caerse de la carcasa del Surface. No pierdas de vista la lente y devuélvela a su sitio en el estuche durante el montaje.

Your contributions are licensed under the open source Creative Commons license.