Fix Your Stuff Community Store

Microsoft Surface Pro 7 Motherboard tauschen

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Back to Guide
English
German
Previous step Next step

Translating step 10

Step 10
Microsoft Surface Pro 7 Motherboard Replacement, Disconnect all cables from the motherboard: step 0, image 1 of 3 Microsoft Surface Pro 7 Motherboard Replacement, Disconnect all cables from the motherboard: step 0, image 2 of 3 Microsoft Surface Pro 7 Motherboard Replacement, Disconnect all cables from the motherboard: step 0, image 3 of 3
Disconnect all cables from the motherboard

  • Use the flat end of a spudger to flip up the white plastic locking flap of the ZIF connector at the top-left corner of the motherboard.

  • Be sure to pry up on the hinged flap, not the connector itself.

  • Use your fingers or a pair of tweezers to pull the cable out.

Alle Kabel vom Motherboard abtrennen

Benutze das flache Ende eines Spudgers, um den weißen Verriegelungsbügel aus Kunststoff am ZIF-Verbinder in der linken oberen Ecke des Motherboards hochzuklappen

Achte darauf, an der Klappe mit dem Scharnier zu hebeln und nicht am Stecker selbst.

Ziehe das Kabel mit deinen Fingern oder einer Pinzette heraus.

Your contributions are licensed under the open source Creative Commons license.