Skip to main content

Reemplazo de la placa madre de Microsoft Surface Pro 7

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Spanish

Translating step 10

Step 10
Microsoft Surface Pro 7 Motherboard Replacement, Disconnect all cables from the motherboard: step 0, image 1 of 3 Microsoft Surface Pro 7 Motherboard Replacement, Disconnect all cables from the motherboard: step 0, image 2 of 3 Microsoft Surface Pro 7 Motherboard Replacement, Disconnect all cables from the motherboard: step 0, image 3 of 3
Disconnect all cables from the motherboard
  • Use the flat end of a spudger to flip up the white plastic locking flap of the ZIF connector at the top-left corner of the motherboard.

  • Be sure to pry up on the hinged flap, not the connector itself.

  • Use your fingers or a pair of tweezers to pull the cable out.

Utiliza el extremo plano de un spudger para levantar la solapa de plástico blanca del conector ZIF situada en la esquina superior izquierda de la placa madre.

Asegúrate de hacer palanca en la solapa con bisagras, no en el propio conector.

Utiliza tus dedos o unas pinzas para sacar el cable.

Your contributions are licensed under the open source Creative Commons license.