Skip to main content

Microsoft Surface Pro 7 Vervanging van het moederbord

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Dutch

Translating step 10

Step 10
Microsoft Surface Pro 7 Motherboard Replacement, Disconnect all cables from the motherboard: step 0, image 1 of 3 Microsoft Surface Pro 7 Motherboard Replacement, Disconnect all cables from the motherboard: step 0, image 2 of 3 Microsoft Surface Pro 7 Motherboard Replacement, Disconnect all cables from the motherboard: step 0, image 3 of 3
Disconnect all cables from the motherboard
  • Use the flat end of a spudger to flip up the white plastic locking flap of the ZIF connector at the top-left corner of the motherboard.

  • Be sure to pry up on the hinged flap, not the connector itself.

  • Use your fingers or a pair of tweezers to pull the cable out.

Gebruik het platte einde van je spudger om de witte plastic sluitklem op de ZIF-aansluiting, linksbovenin het moederbord, omhoog te klappen.

Zorg dat je enkel de sluitklem en niet het contact of de aansluiting zelf omhoog wrikt.

Gebruik je vingers of een pincet om de kabel los te koppelen.

Your contributions are licensed under the open source Creative Commons license.