Fix Your Stuff Community Store

IBM PS2 CL57 SX Disassembly

Back to Guide
English
Spanish
Previous step Next step

Translating step 6

Step 6
IBM PS2 CL57 SX Disassembly, Remove the top rear case: step 0, image 1 of 2 IBM PS2 CL57 SX Disassembly, Remove the top rear case: step 0, image 2 of 2
Remove the top rear case

  • There are multiple ribon cables and wires connected to the top case. Make sure to complete all of the following:

  • Remove the ribbon cable connected underneath the rear right display hinge cover. Use a plastic spudget or plastic tweezers to lift the connector up. You wil then need to slide the ribbon cable towards you and out from under the housing.

  • Disconnect the trackball ribbon cable from underneath the trackball assembly.

  • lift the top rear case back to expose two connectors for the power switch and volume control.

  • You can now lift off the top rear case and set asside.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.