Translating step 11
Step 11
Remove the metal hinge support & regulator card
-
Remove the two (2) 17.5mm screws securing each display hinge.
-
Remove the two (2) 4.5mm screws securing the metal hinge support from the lower case.
-
Remove the two black 8.5mm screws securing the hinge support to the lower case.
-
Remove the two (2) 4.5mm screws holding the regulator card to the hinge support.
-
The metal hinge support can now be lifted off and set aside.
-
Unplug regulator card from the regulator board and set aside.
Your contributions are licensed under the open source Creative Commons license.