Fix Your Stuff Community Store

IBM PS2 CL57 SX Disassembly

Back to Guide
English
Spanish
Previous step Next step

Translating step 14

Step 14
IBM PS2 CL57 SX Disassembly, Remove the main board and ports: step 0, image 1 of 1
Remove the main board and ports

  • Remove the two (2) 10.5mm standoffs with a #4 flat head bit

  • Remove the three (3) 4.5mm screws with a #1 philips bit

  • Disconnect the power connector

  • during the next step you will be removing the main board and the system board as a single assembly. be careful to support the lower board so you dont damage the connector

  • tilt the board up from the left and slide the board up and out making sure not to damage the case and metal clips on the right.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.