Skip to main content

Comment retirer ensemble écran iPhone SE 2022

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

English
French

Translating step 1

Step 1
How to Remove the Display Assembly iPhone SE 2022, Disconnect the display and digitizer cables: step 0, image 1 of 3 How to Remove the Display Assembly iPhone SE 2022, Disconnect the display and digitizer cables: step 0, image 2 of 3 How to Remove the Display Assembly iPhone SE 2022, Disconnect the display and digitizer cables: step 0, image 3 of 3
Disconnect the display and digitizer cables
  • The display and digitizer cables run on top of each other. To avoid cable damage always start by disconnecting the upper cable first and never try to disconnect both at the same time.

  • Use the pointed end of a spudger to disconnect the bottom two display cables by prying the connectors straight up from their sockets.

  • To re-attach press connectors like this, press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is even slightly misaligned, the connector can bend, causing permanent damage.

Les nappes de l'écran et de la vitre tactile se chevauchent. Pour éviter d'endommager les nappes, commencez toujours par débrancher la nappe supérieure et n'essayez jamais de débrancher les deux en même temps.

Utilisez l'extrémité pointue d'une spatule pour déconnecter les deux nappes inférieures de l'écran, en faisant levier sur les connecteurs pour les sortir de leurs prises.

Pour rattacher un connecteur à emboîter comme ceux-ci, appuyez sur un côté jusqu'à ce qu'il s'enclenche en place, puis répétez l'opération de l'autre côté. N'appuyez pas au milieu. Si le connecteur est même légèrement désaligné, il risque de se déformer et causer des dommages permanents.

Your contributions are licensed under the open source Creative Commons license.