/
My Workbench

Get quick access to guides, parts and answers for your devices

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Join
Log In

如何卸下 iPhone SE 2022屏幕组件

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

Back to Guide
English
Chinese
Next step

Translating step 1

Step 1
How to Remove the Display Assembly iPhone SE 2022, Disconnect the display and digitizer cables: step 0, image 1 of 3 How to Remove the Display Assembly iPhone SE 2022, Disconnect the display and digitizer cables: step 0, image 2 of 3 How to Remove the Display Assembly iPhone SE 2022, Disconnect the display and digitizer cables: step 0, image 3 of 3
Disconnect the display and digitizer cables

  • The display and digitizer cables run on top of each other. To avoid cable damage always start by disconnecting the upper cable first and never try to disconnect both at the same time.

  • Use the pointed end of a spudger to disconnect the bottom two display cables by prying the connectors straight up from their sockets.

  • To re-attach press connectors like this, press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is even slightly misaligned, the connector can bend, causing permanent damage.

断开显示器和触屏感应器排线的连接

显示器和触屏感应器的排线是相互叠放。 为了避免排线损坏，请先断开上部排线，切勿尝试同时断开两者。

使用撬棒的尖端将接头从其插槽中向上撬起，从而断开底部的两条排线。

要重新连接这种按压式的接口 ，请小心对齐并向下按压接口的一侧，直至其卡入到位，然后再重复另一侧。请不要按压接口的中间位置。如果接口未对准，针脚可能会弯曲，从而造成永久性损坏。

Your contributions are licensed under the open source Creative Commons license.