Skip to main content

Sostituzione LCD iPad 7

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

English
Italian

Translating step 2

Step 2
iPad 7 LCD Replacement, Flip the LCD over: step 0, image 1 of 3 iPad 7 LCD Replacement, Flip the LCD over: step 0, image 2 of 3 iPad 7 LCD Replacement, Flip the LCD over: step 0, image 3 of 3
Flip the LCD over
  • Don't attempt to fully remove the LCD during this step, as it's still connected by several cables at the home button end.

  • Only lift the LCD from the front-facing camera end.

  • Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers.

  • Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.

  • Lay the LCD down onto a clean, soft, lint-free surface to allow access to the display cables.

Non cercare di rimuovere del tutto l'LCD durante questo passaggio, in quanto è ancora collegato da diversi cavi sul bordo del tasto Home.

Solleva l'LCD solo dal bordo della fotocamera anteriore.

Usa la parte piatta di uno spudger per sollevare l'LCD dal suo alloggio appena il necessario per prenderlo con le dita.

Gira l'LCD dell'iPad come la pagina di un libro, sollevando vicino alla fotocamera e ruotandolo attorno al bordo del tasto Home della copertura posteriore.

Appoggia l'LCD su una superficie pulita, morbida, e senza lanugine per accedere ai cavi dello schermo.

Your contributions are licensed under the open source Creative Commons license.