Skip to main content

iPad 7 LCD Replacement

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

English
Korean

Translating step 2

Step 2
iPad 7 LCD Replacement, Flip the LCD over: step 0, image 1 of 3 iPad 7 LCD Replacement, Flip the LCD over: step 0, image 2 of 3 iPad 7 LCD Replacement, Flip the LCD over: step 0, image 3 of 3
Flip the LCD over
  • Don't attempt to fully remove the LCD during this step, as it's still connected by several cables at the home button end.

  • Only lift the LCD from the front-facing camera end.

  • Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers.

  • Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.

  • Lay the LCD down onto a clean, soft, lint-free surface to allow access to the display cables.

이 단계에서는 LCD를 완전히 분리하려고 시도하지 마세요. 홈 버튼 쪽에 여러 개의 케이블이 여전히 연결되어 있습니다.

전면 카메라 쪽에서 LCD만 들어 올리세요.

스퍼저의 납작한 끝을 사용하여 손가락으로 잡을 수 있을 만큼만 LCD를 오목한 부분 밖으로 들어 올리세요.

iPad LCD를 카메라 근처에서 들어 올려 후면 케이스의 홈 버튼 끝을 책장을 넘기듯 뒤집으세요.

디스플레이 케이블에 접근할 수 있도록 깨끗하고 보풀이 없는 부드러운 표면 위에 LCD를 내려놓으세요.

Your contributions are licensed under the open source Creative Commons license.