Fix Your Stuff Community Store

iPad 7 Logic Board tauschen

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Back to Guide
English
German
Previous step Next step

Translating step 32

Step 32
iPad 7 Logic Board Replacement, Disconnect the charging port: step 0, image 1 of 2 iPad 7 Logic Board Replacement, Disconnect the charging port: step 0, image 2 of 2
Disconnect the charging port

  • Use a Phillips screwdriver to remove the four 2.2 mm-long screws securing the charging port to the rear case.

  • Two 2.2 mm-long screws

  • Two 3.2 mm-long screws

Ladebuchse abtrennen

Drehe die vier 2,2 mm langen Kreuzschlitzschrauben heraus, mit denen die Ladebuchse am Rückgehäuse befestigt ist:

Zwei 2,2 mm lange Schrauben

Zwei 3,2 mm lange Schrauben

Your contributions are licensed under the open source Creative Commons license.