Reemplazo de la placa lógica del iPad 7

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Back to Guide

English

Spanish

Previous step Next step

Translating step 39

Step 39

iPad 7 Logic Board Replacement: step 0, image 1 of 2

iPad 7 Logic Board Replacement: step 0, image 2 of 2

Insert an opening tool near the bottom of the logic board and pry up with a slow and steady force to peel it away from the rear case.
Bending or warping the logic board could lead to permanent damage. If the adhesive feels extra stubborn, apply more heat and try again.
Slide an opening pick underneath the bottom edge of the logic board to slice some of the adhesive if your logic board won't budge.

Bold
Italic
Underline
Link
Inserta una herramienta de apertura cerca de la parte inferior de la placa lógica y haz palanca con una fuerza lenta y constante para despegarla de la caja trasera.
Bold
Italic
Underline
Link
Doblar o deformar la placa lógica puede provocar daños permanentes. Si el adhesivo se resiste demasiado, aplica más calor e inténtalo de nuevo.
Bold
Italic
Underline
Link
Desliza una púa de apertura por debajo del borde inferior de la placa lógica para cortar parte del adhesivo si la placa lógica no se despega.

Your contributions are licensed under the open source Creative Commons license.

Reemplazo de la placa lógica del iPad 7

Translating step 39

Guide Step Edit Keyboard Shortcuts: