Fix Your Stuff Community Store

iPad 7 Logic Board tauschen

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Back to Guide
English
German
Previous step

Translating step 44

Step 44
iPad 7 Logic Board Replacement: step 0, image 1 of 1

  • Remove the logic board.

  • During reassembly, ensure that there are no ribbon cables stuck under the logic board before gluing it down.

  • During reassembly, apply strips of Tesa tape if the original adhesive is too mangled to be reused.

Entferne das Logic Board.

Achte beim Zusammenbau darauf, keine Flachbandkabel unter dem Logic Board einzuklemmen, bevor du es wieder festklebst.

Wenn der alte Kleber nicht mehr gut haftet und nicht mehr verwendet werden kann, dann benutze beim Zusammenbau Tesaband.

Your contributions are licensed under the open source Creative Commons license.