Fix Your Stuff Community Store

Front-Panel-Einheit ausbauen

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

Back to Guide
English
German
Previous step Next step

Translating step 4

Step 4
Front Panel Assembly Removal, Disconnect the display cables: step 0, image 1 of 3 Front Panel Assembly Removal, Disconnect the display cables: step 0, image 2 of 3 Front Panel Assembly Removal, Disconnect the display cables: step 0, image 3 of 3
Disconnect the display cables

  • Use the flat end of a spudger to disconnect the two digitizer cables by lifting straight up on the press connectors.

  • To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.

Displaykabel abtrennen

Hebe die Druckverbinder an den beiden Kabeln zum Touchscreen mit dem flachen Ende des Spudgers gerade nach oben und trenne sie ab

Vermeide Schäden an deinem iPad und heble nur an den Steckern selbst, nicht am Anschluss auf dem Logic Board.

Your contributions are licensed under the open source Creative Commons license.