Fix Your Stuff Community Store

Extracción del ensamblaje del panel frontal

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 4

Step 4
Front Panel Assembly Removal, Disconnect the display cables: step 0, image 1 of 3 Front Panel Assembly Removal, Disconnect the display cables: step 0, image 2 of 3 Front Panel Assembly Removal, Disconnect the display cables: step 0, image 3 of 3
Disconnect the display cables

  • Use the flat end of a spudger to disconnect the two digitizer cables by lifting straight up on the press connectors.

  • To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.

Desconecta los cables del digitalizador

Utiliza el extremo plano de un spudger para desconectar los dos cables del digitalizador levantando hacia arriba los conectores a presión.

Para evitar dañar tu iPad, haz palanca sólo en los conectores propiamente dichos, no en el zócalo de la placa lógica.

Your contributions are licensed under the open source Creative Commons license.