Skip to main content

MacBook Pro 13" Touch Bar 2018 로직보드 교체

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
Korean

Translating step 6

Step 6
MacBook Pro 13" Touch Bar 2018 Logic board Replacement: step 0, image 1 of 3 MacBook Pro 13" Touch Bar 2018 Logic board Replacement: step 0, image 2 of 3 MacBook Pro 13" Touch Bar 2018 Logic board Replacement: step 0, image 3 of 3
  • Insert your opening pick once again under the front edge of the lower case, near one of the two centermost screw holes.

  • Give the pick a firm twist to pop free the third clip securing the lower case to the chassis.

  • Repeat this procedure near the other of the two centermost screw holes, popping the fourth clip free.

하단 케이스의 앞쪽 가장자리 밑, 가장 가운데에 있는 나사 구멍 두 개 중 하나 근처에 여는 픽을 다시 끼우세요.

픽을 힘 있게 비틀어 하단 케이스를 섀시에 고정하는 세 번째 클립이 풀리도록 하세요.

가장 가운데에 있는 나사 구멍 두 개 중 다른 한 개 근처에 이 절차를 반복하여 네 번째 클립을 풀어 주세요.

Your contributions are licensed under the open source Creative Commons license.