Fix Your Stuff Community Store

MacBook Pro 13" Touch Bar 2018 로직보드 교체

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Back to Guide
English
Korean
Previous step Next step

Translating step 21

Step 21
MacBook Pro 13" Touch Bar 2018 Logic board Replacement, Unplug Touch ID and Auxiliary port: step 0, image 1 of 3 MacBook Pro 13" Touch Bar 2018 Logic board Replacement, Unplug Touch ID and Auxiliary port: step 0, image 2 of 3 MacBook Pro 13" Touch Bar 2018 Logic board Replacement, Unplug Touch ID and Auxiliary port: step 0, image 3 of 3
Unplug Touch ID and Auxiliary port

  • Use a T4 Torx driver to remove the two screws.

  • Two T4 Torx screws.

  • Carefully remove the metal shield.

  • Under the metal shield you will find two connectors, carefully unclip them.

  • The second cable you will disconnect will be lightly adhered so carefully slide a plastic spudger under it and finally unplug it.

  • The adhered cable is very thin and delicate so don't rush it and take your time.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.