Fix Your Stuff Community Store

Reemplazo de tarjeta lógica de MacBook Pro 13" Touch Bar 2018

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 28

Step 28
MacBook Pro 13" Touch Bar 2018 Logic board Replacement, Touch bar bracket / Flex: step 0, image 1 of 3 MacBook Pro 13" Touch Bar 2018 Logic board Replacement, Touch bar bracket / Flex: step 0, image 2 of 3 MacBook Pro 13" Touch Bar 2018 Logic board Replacement, Touch bar bracket / Flex: step 0, image 3 of 3
Touch bar bracket / Flex

  • Use a T4 Torx driver to remove the screw.

  • T4 Torx screw.

  • Remove the metal shield carefully.

  • Carefully unplug the connector.

  • The two screws that are outlined in yellow are not relevant to this step and are marked on the board itself. For this step, yellow corresponds to the yellow rectangle in the image.

Soporte para barra táctil / Flex

Usa un desarmador Torx T4 para remover el tornillo.

Tornillo Torx T4.

Retira el escudo de metal con cuidado.

Con cuidado desconecta el conector.

Los dos tornillos que están marcados en amarillo no son relevantes en este paso y están marcados en la misma tarjeta. Para este paso, amarillo corresponde al rectángulo amarillo de la imagen.

Your contributions are licensed under the open source Creative Commons license.