Skip to main content

MacBook Pro 13" Touch Bar 2018 로직보드 교체

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
Korean

Translating step 28

Step 28
MacBook Pro 13" Touch Bar 2018 Logic board Replacement, Touch bar bracket / Flex: step 0, image 1 of 3 MacBook Pro 13" Touch Bar 2018 Logic board Replacement, Touch bar bracket / Flex: step 0, image 2 of 3 MacBook Pro 13" Touch Bar 2018 Logic board Replacement, Touch bar bracket / Flex: step 0, image 3 of 3
Touch bar bracket / Flex
  • Use a T4 Torx driver to remove the screw.

  • T4 Torx screw.

  • Remove the metal shield carefully.

  • Carefully unplug the connector.

  • The two screws that are outlined in yellow are not relevant to this step and are marked on the board itself. For this step, yellow corresponds to the yellow rectangle in the image.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.